The Offical Blog of the Baseball Coaching Digest

The Baseball Coaching Digest's blog is your online source to free baseball articles, free baseball drills, and free baseball tips. Our daily posts can help your plan baseball practice, improve your baseball drills, and help make your baseball workouts run smoother. Our daily post and archives provide your with hundreds of recommended baseball coaching posts. Make sure to bookmark this site for future visits. Have a great day and good luck to your team!

Showing posts with label little league digest. Show all posts
Showing posts with label little league digest. Show all posts

Friday, October 14, 2011

Baseball Drills - Outfield Drills for Game Day Skills

Baseball Drills - Outfield Drills for Game Day Skills
By guest author: Kenny Buford

There is more to developing outfield skills than just playing catch. Outfielders need baseball drills that will prepare them for conditions they will face on game day. The following outfield drills help players become comfortable with any situation they might encounter during a game.

Sun Drill

For this drill, the players line up facing the sun and take turns catching fly balls from the coach. The players can wear sun glasses, but often the glare is still too much. Outfielders need to get used to using their gloves to block the sun while watching for the ball. Over time, the players will develop an approach for using the glove to see while also preparing for the catch and will feel confident in the outfield on sunny game days.

Fence Drill

This outfield drill teaches players how to correctly go for a catch against the fence. A lot of factors will come into play in this type of situation during a game, like where the ball is, how hard it is hit, and its elevation as it approaches the fence. However, with practice outfielders can become more comfortable going for the fence.

In this drill, the outfielders should start 10 to 15 feet away from the fence. One at a time, the coach throws high fly balls either above or against the fence. The outfielder takes his ready steps and rushes to the fence, keeping his eyes on the ball and his throwing hand outstretched to guide him and protect him from running into the fence. The player then makes the catch, jumping in front of or leaning against the fence.

Line Drive Drill

Line players up in the outfield and have them take turns running the drill. The first outfielder takes his ready step as the coach throws a line drive toward his knees. The player runs directly at the coach, keeping his palms up and his glove in basket form. When he catches the ball, the player shoots his glove up in the air to show the umpire he got it.

Backup Drill

This drill emphasizes communication in the outfield and prepares players to back each other up on fly balls.

For this drill, the players form two lines in the outfield, about 90 feet apart. The coach hits or throws a fly ball between the first two players in each line. The players have to communicate who is going for the catch, making sure not to run into each other while still watching the ball. The player going for the catch should yell "got it" and the other player should respond "take it." The second player should still back up the first player in case the ball gets through.

And if you'd like to see more free baseball drills and coaching tips, go here to watch a free video:

http://www.baseball-tutorials.com/vid/

Kenny Buford is a youth baseball coach, and the owner and publisher of Baseball-Tutorials.com, the web's #1 resource for baseball drills, tips, and practice ideas for youth and high school coaches.

Article Source: http://EzineArticles.com/?expert=Kenny_Buford

========================
Thanks to our sponsors:



Joe Mauer Quick Swing Trainer
QuickSwingTrainer.com
How Does the Quick Swing Batting Trainer Work?
Joe Mauer Quick Swing Links
Video Demo of the Joe Mauer Quick Swing Baseball Batting Trainer

Wednesday, June 22, 2011

Baseball Coaching Digest - The 4 Key Elements That Help a Batter Hit a Baseball With More Power

Baseball Coaching Digest - The 4 Key Elements That Help a Batter Hit a Baseball With More Power
By guest author: Nick Dixon

Every baseball player loves to hit the ball hard and far. The power required to hit the baseball deep comes from the generation of maximum bat speed. The generation of bat speed is created by the correct use of the lower body, hips and hands. Four key elements are required to make the batting swing more powerful. This article outlines and explains those key elements.Those key elements are:

1) The Batter Uses the Front Leg as Leverage to Generate Maximum Bat Speed. - What is leverage in the baseball swing? Why is leverage important? How is leverage generated? Leverage in a baseball swing is a resistance point or stationary object that stops forward movement. The front foot acts as the lever and provides leverage to the swing. For this leverage to occur the batter must allow the ball pass front foot. The front foot should be closed with the toes pointed toward the plate to supply maximum leverage to the swing. This leverage is the force against which the batter rotates the hips against. The front leg must be strait and planted to allow the hips to turn.

2) The Batter Generates Maximum Rotational "Torque of the Hips". - I use the term "Hip Torque" to describe the power the hips add to the swing. Batters must rotate the hips to achieve maximum bat speed. To get the maximum hip turn the front foot should be kept in a closed position. If the front foot is allowed to rotate or is in an open position at any point during the swing, there will be a loss of hip energy and a reduction of power in the swing.

The back foot is often lifted or turned up onto the toe. Many coaches describe the action of the back foot as a turn of the "shoe laces to the pitcher". The back foot action is not nearly as important as the front foot. The one thing that must be monitored is that the back foot does not travel forward. The back foot should stay where it was at the beginning of the swing, but the heel should lift and the foot turn to free the back side and to allow for maximum hip and torso rotation.

3) The Batter Keeps of the Hands Close to the Body. The Batter Keeps the Hands on the Shortest Power Path to the Ball. - The power track for the hands is a path that starts above the ball and close to the body. The "power track" is a short compact swing that is directly to the ball. To generate great bat speed the batter must drive the knob and bury it at the power contact position. Keeping the hands closer to the body also keeps the hands inside the ball.

4) The Batter Achieves Maximum Extension Through the Ball. - The batter that keeps the bat on the ball plane as long as possible is able to generate the maximum amount of power possible. The track or path of the bat should be downward until it gets to the balls plane. When the bat gets on an even plane with the ball, the batter should then drive the hands forward through the ball. This power extension has the top hand in a palm down position and the bottom hand in a palm up position. This forward extension or drive through the baseball is a key element of generating power.

I hope that this article was informative and helpful to you. I appreciate you taking the time to read. Have a great day, Nick.

The CoachesBest Baseball Store has a great selection of 1400 Baseball Products. Check out the BatAction Hitting Machine baseball pitching simulator. This high speed training machine is 100% Guaranteed to raise Batting Averages and has a full year warranty.

Nick Dixon is the President and founder of Nedco Sports, a sports training company established in 1999. Dixon is also an active and full time high school baseball coach with over 25 years experience. Coach Dixon is better known as the inventor of the BatAction Hitting Machine, the SKLZ Derek Jeter Hurricane Hitting Machine, the SKLZ Target Trainer, the SKLZ Derek Jeter ZipnHit Pro, and the SKLZ Strikeback Trainer. Dixon is also a contributing writer for BaseballCoachingDigest, the Youth Baseball Digest, the Baseball Parent Guide, the Baseball 2Day Coaches Journal, and Blog4Coaches.

Article Source: http://EzineArticles.com/?expert=Nick_Dixon

=====================
Thanks to our sponsors:


www.BatAction.com



---BatAction Machine at CoachesBest.com
---BatActionMachine on Ebay.com
---BatAction Machine Video Clips
---BatAction Trainer - 15 Reasons Why You Must Own This Machine
---Message to Parents From Coach Nick
---If you are looking for BatAction Replacement Balls or Power Bands Click Here

Wednesday, April 20, 2011

Little League Digest - 10 Base Running Tips For Little League Baseball Players

Little League Digest - 10 Base Running Tips For Little League Baseball Players
By guest author: Nick Dixon


There are several important coaching points that need to be remembered when teaching Little League players to run the bases correctly. This article presents 10 coaching points for little league baseball runners related to first baseball.

Coaching Points related to base running at 1st base:

1. The batter must sprint out of the batter's box and take a straight line path toward first base. The batter base runner must "honor" the base running box. The base running box allows the umpire to determine if a base runner is inside the base line. If a runner gets inside the foul line and a throw ball makes contact with the runner, the batter base runner is out. If a ball is a slow roller in the direction of first base, the batter base runner must avoid contact with the ball. Stepping on, contacting or touching the ball in fair territory will result in an out.
2. When a batter hits the ball his approach to first base is determined by the location of the hit ball as it travels into the field. If the ball is a fielded grounder, the base runner will run through the bag at 1st.
3. If the hit ball gets by the infielder, either as a hit or error, the batter base runner should do a "hook" path as he approaches first base to give him a straighter angle to advance to second base if the first base coach sends him.
4. The batter base runner should run hard through the bag when he is attempting to beat a throw to first. The runner should concentrate on running to a spot about 15 feet past the bag. When the runner touches the bag, the runner's foot should land on the front 1/3 of the bag.
5. The batter base runner should always look to the right when he crosses the bag on a close play. This look allows the batter base runner to see if the throw was missed by the first baseman.
6. If the base runner is sent to second, the runner should only contact the inner corner of the base as he makes the turn toward second base.
7. The runner should always run everything out as if the ball is fair. The runner should hustle and assume that all fly balls will be missed.
8. The runner must run out all foul balls because of the "roll back" rule. If a foul ball hits and kicks back into fair territory between home and 1st base or between home and 3rd base, the ball is fair. The ball will be fair as long as the ball does not contact a bat, fence, dugout, or fielder.
9. The batter base runner that sees an errant throw should not immediately advance to second. The runner must listen to his coach. The coach will make sure that the catcher is not trailing the play.
10. Older or advanced runners may be taught to read the firstbaseman's footwork to detect a possible catch ad tag play. If the throw from the fielder pulls the first baseman off the bag, the only possibility for getting the runner out is a tag. If the runner sees the first baseman coming off the bag toward him, he should slide to avoid the tag.

The CoachesBest Baseball Store has a great selection of 1400 Baseball Products. Check out the Mauer Quick Swing baseball batting trainer.

Nick Dixon is the President and founder of Nedco Sports, a sports training company established in 1999. Dixon is also an active and full time at Boaz High School in Alabama. Coach Dixon is better known as the inventor of the BatAction Hitting Machine, the SKLZ Derek Jeter Hurricane Hitting Machine, the SKLZ Target Trainer, the SKLZ Derek Jeter ZipnHit Pro, and the SKLZ Strikeback Trainer. Dixon is also a contributing writer for BaseballCoachingDigest, the Youth Baseball Digest, the Baseball Parent Guide, the Baseball 2Day Coaches Journal, and Blog4Coaches.

Article Source: http://EzineArticles.com/?expert=Nick_Dixon



Article Source: http://EzineArticles.com/3865265
================
Thanks to our sponsors:

www.BatAction.com



---BatAction Machine at CoachesBest.com
---BatActionMachine on Ebay.com
---BatAction Machine Video Clips
---BatAction Trainer - 15 Reasons Why You Must Own This Machine
---Message to Parents From Coach Nick
---If you are looking for BatAction Replacement Balls or Power Bands Click Here

Friday, April 15, 2011

Youth Baseball Digest - What is on Base Percentage? How is on Base Percentage Calculated?

Youth Baseball Digest - What is on Base Percentage? How is on Base Percentage Calculated?
By guest author: Nick Dixon


On Base Percentage (OBP) is a vital baseball statistic that tells how effectively a batter is getting his job done at the plate. On baseball percentage is often referred to the OBP. On Base Percentage is often referred to as the "on base average" or OBA.

What is On Baseball Percentage?

OBP is a statistic expressed in a three digit number that shows how often reaches first base. The OBP represents every way a batter can gets to first base for any reason other than a fielding error or a fielder's choice. On-base percentage is the measure of the number of times a player gets on base by getting on base with a hit, by drawing a base on balls, and by being hit by pitch. The expressed as a percentage of his total number of plate appearances.

How is calculate OBP?

OBP is calculated using the simple mathematical formula. To calculate the OBP you first add the total number of hits, walks and times the batter is hit by a pitch. You then divide that total by the total number of at-bats, walks, times hit by a pitch and sac flies..

OBP is calculated using this formula:

(Number of H + BB + HBP)

Divided by

(Number AB + BB + HBP + SF)

= OBP

Symbols used in the formula above:

H = Hits

BB = Bases on Balls (Walks)

HBP = Hit By a Pitch

AB = At bats

SF = Sacrifice Flies

I hope that you have a better understanding of OBP after reading this article. I really appreciate you taking the time to read it. Good luck this season, Nick.

The CoachesBest Baseball Store has a great selection of 1400 Baseball Products. Check out the BatAction Hitting Machine baseball pitching simulator. This high speed training machine is 100% Guaranteed to raise Batting Averages and has a full year warranty.

Nick Dixon is the President and founder of Nedco Sports, a sports training company established in 1999. Dixon is also an active and full time high school baseball coach. Dixon is better known as the inventor of the BatAction Hitting Machine and the Derek Jeter Hurricane Hitting Machine. Dixon is a contributing writer for the Baseball Coaching Digest, the Baseball Parent Guide, the Baseball 2Day Coaches Journal, and Blog4Coaches.

Article Source: http://EzineArticles.com/?expert=Nick_Dixon




Article Source: http://EzineArticles.com/3479118
==============
Thanks to our sponsors:


www.BatAction.com



---BatAction Machine at CoachesBest.com
---BatActionMachine on Ebay.com
---BatAction Machine Video Clips
---BatAction Trainer - 15 Reasons Why You Must Own This Machine
---Message to Parents From Coach Nick
---If you are looking for BatAction Replacement Balls or Power Bands Click Here

Monday, September 13, 2010

Little League Digest - 10 Base Running Tips For Little League Baseball Players

Little League Digest - 10 Base Running Tips For Little League Baseball Players
By guest author: Nick Dixon

There are several important coaching points that need to be remembered when teaching Little League players to run the bases correctly. This article presents 10 coaching points for little league baseball runners related to first baseball.

Coaching Points related to base running at 1st base:

1. The batter must sprint out of the batter's box and take a straight line path toward first base. The batter base runner must "honor" the base running box. The base running box allows the umpire to determine if a base runner is inside the base line. If a runner gets inside the foul line and a throw ball makes contact with the runner, the batter base runner is out. If a ball is a slow roller in the direction of first base, the batter base runner must avoid contact with the ball. Stepping on, contacting or touching the ball in fair territory will result in an out.
2. When a batter hits the ball his approach to first base is determined by the location of the hit ball as it travels into the field. If the ball is a fielded grounder, the base runner will run through the bag at 1st.
3. If the hit ball gets by the infielder, either as a hit or error, the batter base runner should do a "hook" path as he approaches first base to give him a straighter angle to advance to second base if the first base coach sends him.
4. The batter base runner should run hard through the bag when he is attempting to beat a throw to first. The runner should concentrate on running to a spot about 15 feet past the bag. When the runner touches the bag, the runner's foot should land on the front 1/3 of the bag.
5. The batter base runner should always look to the right when he crosses the bag on a close play. This look allows the batter base runner to see if the throw was missed by the first baseman.
6. If the base runner is sent to second, the runner should only contact the inner corner of the base as he makes the turn toward second base.
7. The runner should always run everything out as if the ball is fair. The runner should hustle and assume that all fly balls will be missed.
8. The runner must run out all foul balls because of the "roll back" rule. If a foul ball hits and kicks back into fair territory between home and 1st base or between home and 3rd base, the ball is fair. The ball will be fair as long as the ball does not contact a bat, fence, dugout, or fielder.
9. The batter base runner that sees an errant throw should not immediately advance to second. The runner must listen to his coach. The coach will make sure that the catcher is not trailing the play.
10. Older or advanced runners may be taught to read the firstbaseman's footwork to detect a possible catch ad tag play. If the throw from the fielder pulls the first baseman off the bag, the only possibility for getting the runner out is a tag. If the runner sees the first baseman coming off the bag toward him, he should slide to avoid the tag.

The CoachesBest Baseball Store has a great selection of 1400 Baseball Products. Check out the Mauer Quick Swing baseball batting trainer.

Nick Dixon is the President and founder of Nedco Sports, a sports training company established in 1999. Dixon is also an active and full time at Boaz High School in Alabama. Coach Dixon is better known as the inventor of the BatAction Hitting Machine, the SKLZ Derek Jeter Hurricane Hitting Machine, the SKLZ Target Trainer, the SKLZ Derek Jeter ZipnHit Pro, and the SKLZ Strikeback Trainer. Dixon is also a contributing writer for BaseballCoachingDigest, the Youth Baseball Digest, the Baseball Parent Guide, the Baseball 2Day Coaches Journal, and Blog4Coaches.


===========
Thanks to our sponsors:

BattingCagesDirect.com
XtenderbattingCages.com

Suggested links:

RottenSports.com
RottenCoaches.com
Blog4Coaches.com
WildSportsVideos,.com
BaseballCoachingDigest.com
YouthBaseballDigest.com
LittleLeagueDigest.com
SoftballBloopers.com
FunnyBaseballVideo.com
BaseballBloopersandBlunders.com
New Articles for Coaches
Baseball Coaching Articles by Coach Nick Dixon
New Baseball Blogs
Videos for Baseball Coaches

YouthBaseballDigest.com
Homepage
Today's Youth Baseball Coaching Feature Article
Videos for Coaches
Blogs & Knols for Baseball Coaches, Players & Parents

BaseballParentGuide.com
Homepage
Baseball Parent Guide: Today's Post
Baseball Articles for Coaches
Baseball Blogs
Teaching Your Child to Hit
Throwing and Pitching Fundamentals
Buying Guide For Baseball Parents
Current Topics and Issues Related to Safety in Baseball